What keep the snare/and support from spinning in the ground? [/b]
Hey received my snares today. The way they have the wire set up for this "kit" is to put a "U" at the bottom. One side is longer than the other and on the short side about 4-5". You will then pound the "U" into the ground w/ the snare tool and it keeps it from spinning. This kit does not have the washer. Very easy to make. Now that I know it will be very simple. [/b]
I made my own supports and driver like this and they work well. Just bend a 2 inch J at one end. I can usually just push them in where there is soft ground and then if the ground is harder use the driver over the J and tap it in. They don't move much and you can set them anywhere.
